Geology of the Bottesford Area

Exploring the Vale of Belvoir
By Neil Fortey

Photo:Gryphaea arcuata, the "Devil's Toenail", a fossil oyster from the bed of the Liassic sea.

Gryphaea arcuata, the "Devil's Toenail", a fossil oyster from the bed of the Liassic sea.

By permission of Peter Sheldon, Open University.

Rocks and minerals play a vital part in very many aspects of day to day life. "If you can't grow it, you have to dig it out of the ground", as someone once said. We are totally dependent on metals, minerals, oil and groundwater. Underlying rocks are also important in creating productive soils, and therefore to the success of farming.

Despite the lack of bare rock crags, bedrock is never far beneath our feet, and fossils appear where the clay soils have been ploughed or excavated. Fossilised shells of the exctinct oyster known as Gryphaea, or popularly as the "Devil's Toenail", are easy to find in the country around Bottesford, and delight children when the come across them on footpaths and in gardens.

Photo:Looking SW from Beacon Hill past Bottesford spire towards Barkestone spire and the Marlstone Rock escarpment.

Looking SW from Beacon Hill past Bottesford spire towards Barkestone spire and the Marlstone Rock escarpment.

Photo by Neil Fortey, 2007

The mudstones and limestone of the Vale of Belvoir around Bottesford and Muston belong to the oldest part of the Jurassic Period.  West of the low escarpment that stretches from Langar round to Staunton are older, Triassic mudstones with beds of gypsum. These rocks were formed as layers of sediment on ancient sea beds. The strata tilt gently southeastwards, so that the outcrop becomes progressively younger towards the Chalk of the Lincolnshire Wolds. This is country of subdued relief, with many flat areas and fens, in which bedrocks are rarely exposed. Deep beneath lie deposits of coal whose mining was proposed in the 1980s. Oil and gas have also been extracted on a small scale.

The geological map shows the rock formations in the Bottesford area. Each formation is shown as a band of different colour, showing where its outcrop runs across the countryside. It is based upon the geological maps mentioned, with the permission of the British Geological Survey. The key sets out the names of the formations and the age-sequence in which they occur.

Photo:A geological map of the Bottesford area in the Vale of Belvoir

A geological map of the Bottesford area in the Vale of Belvoir

Compiled by Neil Fortey from maps published by the British Geological Survey

Photo:Stratigraphic column, the key to the sequence of rock formations on the geological map.

Stratigraphic column, the key to the sequence of rock formations on the geological map.

Compiled by Neil Fortey from maps published by the British Geological Survey

Detailed information can be found in British Geological Survey maps Nottingham (E126), Grantham (E127), Melton Mowbray (E142) and Bourne (E143). These and books about geology can be purchased from: The British Geological Survey, Kingsley Dunham Centre, Keyworth, Nottingham BG12 5GG, or online at www.bgs.ac.uk . These are immensely, bewilderingly detailed, technically precise publications. Looking at the gentle fields of the area you might wonder how the experts can know what lies beneath us in so much detail. It's a good question, but not one for this brief summary.

Another source is "The Geology of the East Midlands", Geologists's Association Guide No.63 (2003), which includes an excellent if somewhat muddy walk across the "Liassic of the Vale of Belvoir" described by Alan Brandon, which starts at Sutton in the Vale and follows public footpaths SE to Barkestone and then on to Belvoir Castle.

The Bottesford Community Heritage Project is grateful for the advice and assistance freely given by John Carney, Graham Lott, Caroline Adkins and Jim Rayner of the British Geological Survey, and by Glynda Easterbrook of the Open University.

This page was added by Neil Fortey on 15/04/2008.

Comments about this page

Hi Neil
I recall that you pointed out the correlation of the alignment of Vale of Belvoir villages with the the Stubton Limestones (Plungar, Barkestone, Redmile, Allington etc). Quite remarkable to see in the map the impact of hidden geology on the settlement pattern. Are the Churches built from this limestone? Dave

By David Middleton
On 16/04/2008

The main stones used in local churches are (1) a red-orange iron rich limestone, (2) a flaky grey limestone and (3) a grey hard limestone. No. (1) is generally thought to be from the Marlstone Rock which forms the top of the escarpment of Belvoir Castle - a good example is the masonry of Eastwell parish church. No. (2) is more problematic in that it was probably from small local quarries which might have been in Stubton Limestone but might also have been in some of the other limestone bands that occur in the Lias. This is a soft, poor quality stone and probably was not used if (1) was available. Stone no. (3) is the high quality stone (ashlar) used in windows and the corners of churches (quoins) and probably came from the quarries around Ancaster. So the answer to your question is a qualified 'yes', subject to the uncertainty of knowing where the local stone pits were.
Neil

By Neil Fortey
On 17/04/2008

Add a comment about this page